1. Connect to your modem via WIFI or ethernet cable
3. Enter your default gateway into a web browser this will likely be ether 192.168.1.1 or 192.168.10.1
4. enter the password for your modems interface (default is ether “admin” , “[email protected]”, or “admin123” depending on what firmware is on the modem)
5. if your screen say intelligent router at the top left proceed to the next step if your screen does NOT say intelligent router at the top left STOP this instruction set will not work for you and you will need to call spark services and advise them of the situation
6. Click network on the left hand side
7. Click 3G/4G at the top of the screen
8. Click advanced setup (this is written in blue letters above the red lettered warning)
9. look for the field labeled “APN Server (optional)” make sure it says 30691.mcs if it dose no further action is required and you may proceed to the next step if it doesn’t change it to “30691.mcs” and click save
10. exit your internet browser