Torch APN Update

AT&T has made some changes to the service. It is still unlimited however, we do need to make some changes to your modem. We can’t do them remotely so we need your help. The steps are below. If you need assistance please feel free to call the office and we will be more than happy to help you. 918–608-8888
Step 1. Connect your modem to a laptop or desktop with an ethernet cable into the LAN port on the modem, this can also be done by WIFI (you do not need service for this)
Step 2. Open a web browser at the very top address bar type in this IP address 192.168.1.1 This will bring up the interface of the modem. In the password text box enter Securewisp01 which will let you into the modem.
Step3. At the top of the screen to the right under mode click on basic which will change it to advanced.
Step 4. Place your curser over the network tab on the left of the screen and click on interfaces.
Step 5. Scroll down to the fourth text box which is labeled MOB1S1. To the right click on the pencil icon and scroll down and click on auto APN to turn it off. In the blank APN text box enter 30691.mcs scroll down and click on the save & apply button.
Step 6. Once the APN has saved unplug the modem for 5 minutes and plug it back in. Connect to the modem and run a speed test to ensure your services are running correctly.